MODULAR
STEELWORK SOLUTIONS
Fixings & Fastenings

Drop-In Anchor

Application

Hammerset Anchor for non-cracked concrete (fixing to the compression zone of concrete), used for all M&E services.
The flared collar prevents the anchor from being driven too far into the drilled hole and ensure that the anchor remaines flush with the base material surface.
Suitable for fixing pipework, channels, suspension rods etc.
No Special drill bit required.

Scope of delivery

The expansion cone is retained within the sleeve thus preventing any accidental falling out prior to being installed.

Installation

The setting tool for the hammerset anchor is to be used as setting tool for correct distance-controlled expansion.

Technical Data

Type
M6x25
M8x30
M10x30
M10x40
M12x50
M16x65
Permissible load (tensile, shear, combined)
in non-cracked concrete >C25 (kN)
1,0 1,8 3,0 3,6 5,7 7,4
Permissible bending moment (Nm) 3,3 6,2 12,5 12,5 21,8 55,5
Recommended embedment depth (mm) 25 30 30 40 50 65
Usable thread engagement length (mm) 11 13 12 15 18 23
Axial spacing (mm) 180 240 240 320 400 540
Edge spacing (mm) 90 120 120 160 200 260
Min. base material thickness (mm) 100 160 160 200 200 240
Nominal diameter of drill bit (mm) 8 10 12 12 15 20
Min. drill hole depth (mm) 27 33 33 44 54 71
Max. engagement depth (mm) 11 13 12 15 18 23
Installation torque(Nm) 5 8 15 15 35 60
Spanner/Socket A/F (mm) 10 13 17 17 19 24


Material: Steel, electro-galvanised.

TypeLengthW
[kg]
Quantity
[pack]
Part
number
M8 x 25250,01500 225500
M8 x 30300,01500 225505
M10 x 30300,02500 225514
M10 x 40400,02100 225515
M12 x 50500,0550 225523
M18 x 65650,1125 212518